Assessing nitrate groundwater hotspots in Europe reveals an inadequate designation of Nitrate Vulnerable Zones.

Monitoring networks show that the European Union Nitrates Directive (ND) has had mixed success in reducing nitrate concentrations in groundwater. By combining machine learning and monitored nitrate concentrations (1992-2019), we estimate the total area of nitrate hotspots in Europe to be 401,000 km2, with 47% occurring outside of Nitrate Vulnerable Zones (NVZs). We also found contrasting increasing or decreasing trends, varying per country and time periods. We estimate that only 5% of the 122,000 km2 of hotspots in 2019 will meet nitrate quality standards by 2040 and that these may be offset by the appearance of new hotspots. Our results reveal that the effectiveness of the ND is limited by both time-lags between the implementation of good practices and pollution reduction and an inadequate designation of NVZs. Substantial improvements in the designation and regulation of NVZs are necessary, as well as in the quality of monitoring stations in terms of spatial density and information available concerning sampling depth, if the objectives of EU legislation to protect groundwater are to be achieved.

Predictors of first-year postoperative complications after fixation of low-energy ankle fractures: A single-center, retrospective cohort study of 663 consecutive fractures. / [Artículo traducido] Predictores de las complicaciones postoperatorias en el primer año tras la fijación de fracturas de tobillo de baja energía. Estudio de cohortes retrospectivo sobre 663 fracturas intervenidas consecutivamente en un único centro.

INTRODUCTION: Rotational ankle fractures are common, have diverse personalities and affect both robust and fragile patients. Postoperative complications are frequent, creating a sizeable economic burden. The primary purpose of this study was to expand current knowledge on predictors of postoperative complications after low-energy ankle fracture fixation. MATERIALS AND METHODS: A retrospective single-center cohort study was completed of patients undergoing internal fixation OF low-energy ankle fractures. The primary outcome was first-year postoperative complications, classified as major (surgical) or minor (non-surgical). Data on patients, their injuries, and treatments were collected. To identify potential predictors of outcomes, logistic regression methods were used, with a backward-stepwise method used for model fitting. RESULTS: In total, 663 patients of median age 59 years were analysed. We found a high rate of complications (28.4%), with wound-healing issues and infections predominant. Overall, 14.8% had minor complications, while 13.6% required an unplanned reoperation. On multivariable analysis, the most consistent predictors of complications were older age (OR: 1.02 per year), longer operating time (3.32 per hour), and smoking (2.91). CONCLUSIONS: Older patients and smokers who sustain fractures requiring more complex surgery are at higher risk of postoperative complications.

[Translated article] Insertion of S1 iliosacral screws in the computed tomography room: An alternative to improve safety in the percutaneous management of posterior pelvic ring injuries.

INTRODUCTION: The main complication of percutaneous iliosacral screw fixation is implant malposition, which can lead to vascular and nerve damage. The anatomical variability of the sacrum can make screw insertion difficult under fluoroscopic guidance. Among the methods described to improve the accuracy of this technique, stands out the use of computed tomography (CT). The aim of this study is to compare the results of iliosacral screw insertion with fluoroscopy or CT navigation. METHODOLOGY: Retrospective cohort study of 66 iliosacral screws in 56 patients during 11 years. The screws were inserted with fluoroscopy in the operating room or with CT in the radiodiagnosis area. We collected data on patient characteristics, lesions, treatment, and clinical and radiological results. RESULTS: Forty-seven screws were inserted with fluoroscopy and 19 with CT. A percentage of 18.2 of screws perforated the S1 osseous corridor. All of them were inserted with fluoroscopy guidance (0 vs. 34%; p<0.01). Those operated with CT accumulated more sacral dysmorphism criteria than those operated with fluoroscopy (2.2 vs. 1.6; p=0.02). The S1 corridor on the axial CT view was narrower in those in whom perforation had occurred (18.8 vs. 21.0mm; p=0.02). Two cases with perforation developed S1 radiculalgia. Two endopelvic screws had to be removed. CONCLUSION: We advise the use of CT guidance for iliosacral screw insertion in patients with sacral dysmorphism or narrow S1 corridors in facilities where other navigation methods are not available.

Predictors of first-year postoperative complications after fixation of low-energy ankle fractures: A single-center, retrospective cohort study of 663 consecutive fractures.

INTRODUCTION: Rotational ankle fractures are common, have diverse personalities and affect both robust and fragile patients. Postoperative complications are frequent, creating a sizeable economic burden. The primary purpose of this study was to expand current knowledge on predictors of postoperative complications after low-energy ankle fracture fixation. MATERIALS AND METHODS: A retrospective single-center cohort study was completed of patients undergoing internal fixation OF low-energy ankle fractures. The primary outcome was first-year postoperative complications, classified as major (surgical) or minor (non-surgical). Data on patients, their injuries, and treatments were collected. To identify potential predictors of outcomes, logistic regression methods were used, with a backward-stepwise method used for model fitting. RESULTS: In total, 663 patients of median age 59 years were analyzed. We found a high rate of complications (28.4%), with wound-healing issues and infections predominant. Overall, 14.8% had minor complications, while 13.6% required an unplanned reoperation. On multivariable analysis, the most consistent predictors of complications were older age (OR=1.02 per year), longer operating time (3.32 per hour), and smoking (2.91). CONCLUSIONS: Older patients and smokers who sustain fractures requiring more complex surgery are at higher risk of postoperative complications.

Insertion of S1 iliosacral screws in the computed tomography room: An alternative to improve safety in the percutaneous management of posterior pelvic ring injuries. / Inserción de tornillos iliosacros S1 en la sala de tomografía computarizada. Una alternativa para mejorar la seguridad en el tratamiento percutáneo de las lesiones posteriores del anillo pélvico.

INTRODUCTION: The main complication of percutaneous iliosacral screw fixation is implant malposition, which can lead to vascular and nerve damage. The anatomical variability of the sacrum can make screw insertion difficult under fluoroscopic guidance. Among the methods described to improve the accuracy of this technique, stands out the use of computed tomography (CT). The aim of this study is to compare the results of iliosacral screw insertion with fluoroscopy or CT navigation. METHODOLOGY: Retrospective cohort study of 66 iliosacral screws in 56 patients during 11 years. The screws were inserted with fluoroscopy in the operating room or with CT in the radiodiagnosis area. We collected data on patient characteristics, lesions, treatment, and clinical and radiological results. RESULTS: Forty-seven screws were inserted with fluoroscopy and 19 with CT. A percentage of 18.2 of screws perforated the S1 osseous corridor. All of them were inserted with fluoroscopy guidance (0 vs. 34%; p<0.01). Those operated with CT accumulated more sacral dysmorphism criteria than those operated with fluoroscopy (2.2 vs. 1.6; p=0.02). The S1 corridor on the axial CT view was narrower in those in whom perforation had occurred (18.8 vs. 21.0mm; p=0.02). Two cases with perforation developed S1 radiculalgia. Two endopelvic screws had to be removed. CONCLUSION: We advise the use of CT guidance for iliosacral screw insertion in patients with sacral dysmorphism or narrow S1 corridors in facilities where other navigation methods are not available.

Modulating redox properties of solid-state ion-conducting materials using microwave irradiation.

The industrial adoption of low-carbon technologies and renewable electricity requires novel tools for electrifying unitary steps and efficient energy storage, such as the catalytic synthesis of valuable chemical carriers. The recently-discovered use of microwaves as an effective reducing agent of solid materials provides a novel framework to improve this chemical-conversion route, thanks to promoting oxygen-vacancy formation and O2-surface exchange at low temperatures. However, many efforts are still required to boost the redox properties and process efficiency. Here, we scrutinise the dynamics and the physicochemical dependencies governing microwave-induced redox transformations on solid-state ion-conducting materials. The reduction is triggered upon a material-dependent induction temperature, leading to a characteristically abrupt rise in electric conductivity. This work reveals that the released O2 yield strongly depends on the material's composition and can be tuned by controlling the gas-environment composition and the intensity of the microwave power. The reduction effect prevails at the grain surface level and, thus, amplifies for fine-grained materials, and this is ascribed to limitations in oxygen-vacancy diffusion across the grain compared to a microwave-enhanced surface evacuation. The precise cyclability and stability of the redox process will enable multiple applications like gas depuration, energy storage, or hydrogen generation in several industrial applications.

Leveraging a multivariate approach towards enhanced development of direct compression extended release tablets.

Extended release formulations play a crucial role in the pharmaceutical industry by maintaining steady plasma levels, reducing side effects, and improving therapeutic efficiency and compliance. One commonly used method to develop extended release formulations is direct compression, which offers several advantages, such as simplicity, time savings, and cost-effectiveness. However, successful direct compression-based extended release formulations require careful assessment and an understanding of the excipients' attributes. The scope of this work is the characterization of the compaction behavior of some matrix-forming agents and diluents for the development of extended release tablets. Fifteen excipients commonly used in extended release formulations were evaluated for physical, compaction and tablet properties. Powder properties (e.g., particle size, flow properties, bulk density) were evaluated and linked to the tablet's mechanical properties in a fully integrated approach, and data were analyzed by constructing a principal component analysis (PCA). Significant variability was observed among the various excipients. The present work successfully demonstrates the applicability of PCA as an effective tool for comparative analysis, pattern and clustering recognition and correlations between excipients and their properties, facilitating the development and manufacturing of direct compressible extended release formulations.

Links between gender norms and the intergenerational transmission of health information in parents carrying BRCA1/2 pathogenic variants.

Understanding how gender norms affect parents' communication of genetic and cancer risk information to their children can enable healthcare professionals to better facilitate cascade genetic testing. We conducted a qualitative study with semi-structured interviews to determine social factors associated with parents carrying the BRCA1/2 pathogenic variants who communicated cancer prevention practices to their children. Thirty adult carriers (23 women, 7 men) participated in the interviews. All had at least one child aged over 8 years old. Interview topics included their discovery of the variants, their relationship to their body and to the risk of cancer, as well as disclosure to and subsequent communication with their children after testing positive for BRCA1/2. The interviews were analyzed qualitatively, and the major themes identified were identified and compared. We described the roles played by the BRCA1/2 carriers and their partners in communicating cancer prevention practices to their children, from how they managed their own risk of cancer after testing positive, to how they disclosed the risks linked to these pathogenic variants to their children. We also described their involvement in the process of their children going for professional genetic consultation. Gender norms lead women to be more attentive than men to their own health and that of their loved ones. In the context of the transmission of genetic information to children, gender differences in behavior are reinforced by perceptions of the risks of BRCA1/2 variants and women's related health management practices. Cancer prevention is shaped by complex links between gender norms and health management practices.

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes.

The influence of the inclusion of the organic solvent propylene carbonate (PC) in microporous membranes based on poly(l-lactic acid) (PLLA) and poly(vinylidene fluoride-co-hexafluoropropylene) P(VDF-HFP) has been studied based on its relevance for the application of those separator membranes in lithium-ion batteries. The membranes have been produced through solvent casting and characterized with respect to the swelling ratio originated by the uptake of the organic solvent. The organic solvent uptake affects the porous microstructure and crystalline phase of both membrane types. The organic solvent uptake amount affects the crystal size of the membranes as a consequence of the interaction between the solvent and the polymer, since the presence of the solvent modifies the melting process of the polymer crystals due to a freezing temperature depression effect. It is also shown that the organic solvent partially penetrates into the amorphous phase of the polymer, leading to a mechanical plasticizing effect. Thus, the interaction between the organic solvent and the porous membrane is essential to properly tailor membrane properties, which in turn will affect lithium-ion battery performance.

3D printing of PLA:CaP:GO scaffolds for bone tissue applications.

Graphene oxide (GO) has attracted increasing interest for biomedical applications owing to its outstanding properties such as high specific surface area, ability to bind functional molecules for therapeutic purposes and solubility, together with mechanical resistance and good thermal conductivity. The combination of GO with other biomaterials, such as calcium phosphate (CaP) and biodegradable polymers, presents a promising strategy for bone tissue engineering. Presently, the development of these advanced biomaterials benefits from the use of additive manufacturing techniques, such as 3D printing. In this study, we develop a 3D printed PLA:CaP:GO scaffold for bone tissue engineering. First, GO was characterised alone by XPS to determine its main bond contributions and C : O ratio. Secondly, we determined the GO dose which ensures the absence of toxicity, directly exposed in vitro (human osteoblast-like cells MG-63) and in vivo (zebrafish model). In addition, GO was microinjected in the zebrafish to evaluate its effect on immune cells, quantifying the genetic expression of the main markers. Results indicated that the GO tested (C : O of 2.14, 49.50% oxidised, main bonds: C-OH, C-O-C) in a dose ≤0.25 mg mL-1 promoted MG63 cells viability percentages above 70%, and in a dose ≤0.10 mg mL-1 resulted in the absence of toxicity in zebrafish embryos. The immune response evaluation reinforced this result. Finally, the optimised GO dose (0.10 mg mL-1) was combined with polylactic acid (PLA) and CaP to obtain a 3D printed PLA:CaP:GO scaffold. Physicochemical characterisation (SEM/EDS, XRD, FT-Raman, nano-indentation) was performed and in vivo tests confirmed its biocompatibility, enabling a novel approach for bone tissue-related applications.

Dual pulsed laser deposition of Ag nanoparticles on calcium phosphate coatings for biomedical applications.

Pulsed laser deposition (PLD) represents a promising bottom-up methodology for the synthesis and transference of nanoparticles to the surface of a biomedical device. Silver (Ag) nanoparticles directly incorporated on the metallic implant emerge as an alternative strategy for local action against prosthetic joint-associated infections. In the present research, a dual sequential PLD process is proposed to obtain a bilayer coating with (1) a bio-derived calcium phosphate (CaP) layer, to provide osteointegrative properties and (2) the controlled growth of the Ag nanoparticles over it, ranging the number of laser pulses from 100 to 500. The characterization by SEM, EDS, TEM, XPS and AFM revealed the uniform deposit of Ag rounded nanoparticles, with a narrow mean size distribution, in the original non-oxidized metallic state. Moreover, given the evidences from XPS and AFM techniques, the occurrence of a coalescence phenomenon from 400 pulses onwards was proposed together with the expected positive linear relation between the number of pulses and Ag contribution with a deposition rate of 0.05 at. % of Ag per pulse. Conversely, the decrease in roughness as the Ag content increased was also verified. Finally, the expected bacteriostatic activity for these PLD deposited metallic state Ag nanoparticles against the bacterial strainStaphylococcus aureuswas confirmed. Moreover, the evaluation of the osteoblast-like MG-63 cells viability on the Ag(100-500)-CaP coatings revealed a significant increased proliferation (p > 0.05) on the Ag100-CaP coating compared to the control (Ag0-CaP). When same coating was evaluated againstS. aureusthe effect was not significant. The possibility of modulating the amount of nanoparticles in the bilayer coating to obtain a greater or lesser effect in combination with CaP was revealed.

Understanding patient-reported knowledge of hernia surgery: a quantitative study.

PURPOSE: The objective of this study was to gather information on patient-reported knowledge (PRK) in the field of hernia surgery. METHODS: A prospective quantitative study was designed to explore different aspects of PRK and opinions regarding hernia surgery. Patients referred for the first time to a surgical service with a presumed diagnosis of hernia and eventual hernia repair were eligible, and those who gave consent completed a simple self-assessment questionnaire before the clinical visit. RESULTS: The study population included 449 patients (72.8% men, mean age 61.5). Twenty (4.5%) patients did not have hernia on physical examination. The patient's perceived health status was "neither bad nor good" or "good" in 56.6% of cases. Also, more patients considered that hernia repair would be an easy procedure (35.1%) rather than a difficult one (9.8%). Although patients were referred by their family physicians, 32 (7.1%) answered negatively to the question of coming to the visit to assess the presence of a hernia. The most important reason of the medical visit was to receive medical advice (77.7%), to be operated on as soon as possible (40.1%) or to be included in the surgical waiting list (35.9%). Also, 46.1% of the patients considered that they should undergo a hernia repair and 56.8% that surgery will be a definitive solution. CONCLUSION: PRK of patients referred for the first time to an abdominal wall surgery unit with a presumed diagnosis of hernia was quite limited and there is still a long way towards improving knowledge of hernia surgery.

Cost-effectiveness analysis of the first-line EGFR-TKIs in patients with advanced EGFR-mutated non-small-cell lung cancer.

AIM: To evaluate the cost-effectiveness of first-line treatments, such as erlotinib, gefitinib, afatinib, dacomitinib, and osimertinib, for patients diagnosed with stage IIIB/IV NSCLC harboring EGFR mutations. MATERIALS & METHODS: A partitioned survival model was developed to estimate quality-adjusted life-year (QALY) and incremental cost-effectiveness ratio (ICER) from the perspective of the Spanish National Health System. Two Bayesian NMAs were performed independently, by using the polynomial fraction method to fit Kaplan-Meier curves for overall survival and progression-free survival. Deterministic and probabilistic sensitivity analyses were performed to evaluate the uncertainty. RESULTS: The ICER was calculated for the four first-line treatments by comparing them with gefitinib, and the ratios obtained were as follows: €166,416/QALY for osimertinib, €183,682/QALY for dacomitinib, €167,554/QALY for afatinib, €36,196/QALY for erlotinib. It was seen that patients who received osimertinib presented higher QALYs (0.49), followed by dacomitinib (0.33), afatinib (0.32), erlotinib (0.31), and gefitinib (0.28). CONCLUSIONS: Gefitinib is the most cost-effective treatment. In terms of QALYs gained, Osimertinib was more effective than all other TKIs. Nevertheless, with a Spanish threshold of €24,000/QALY, the reduction in the acquisition cost of osimertinib will have to be greater than 70%, to obtain a cost-effectiveness alternative.

Prioritization criteria of patients on scheduled waiting lists for abdominal wall hernia surgery: a cross-sectional study.

PURPOSE: Long delays in waiting lists have a negative impact on the principles of equity and providing timely access to care. This study aimed to assess waiting lists for abdominal wall hernia repair (incisional ventral vs. inguinal hernia) to define explicit prioritization criteria. METHODS: A cross-sectional single-center study was designed. Patients in the waiting list for incisional/ventral hernia (n = 42) and inguinal hernia (n = 50) repair were interviewed by phone and completed health-related quality of life (HRQoL) questionnaires (EQ-5D, COMI-hernia, HerQLes) as a measure of severity. Priority was measured as hernia complexity, patient frailty using the modified frailty index (mFI-11), and the consumption of analgesics for hernia. RESULTS: The mean (SD) time on the waiting list was 5.5 (3.2) months (range 1-14). Complex hernia was present in 34.8% of the patients. HRQoL was moderately poor in patients with incisional/ventral hernia (mean HerQL score 66.1), whereas it was moderately good in patients with inguinal hernia (mean COMI-hernia score 3.40). The use of analgesics was higher in patients with incisional/ventral hernia as compared with those with inguinal hernia (1.48 [0.54] vs. 1.31 [0.51], P = 0.021). Worst values of mFI were associated with inguinal hernia as compared with incisional/ventral hernia (0.21 [0.14] vs. 0.12 [0.11]; P = 0.010). CONCLUSION: Explicit criteria for prioritization in the waiting lists may be the consumption of analgesics for patients with incisional/ventral hernia and frailty for patients with inguinal hernia. A reasonable approach seems to establish separate waiting lists for incisional/ventral hernia and inguinal hernia repair.

Impacto de la pandemia COVID-19 en la mortalidad del paciente anciano con fractura de cadera / Impact of the COVID-19 pandemic on the mortality of the elderly patient with a hip fracture

La COVID-19 se convirtió en una amenaza para el sistema de salud público, comprometiendo la salud de la población. Los pacientes con fractura de cadera, debido a su edad y comorbilidad, fueron pacientes de alto riesgo en esta pandemia. La finalidad de este estudio fue observar cómo afectó la pandemia al manejo de las fracturas de cadera del paciente anciano. Métodos: Se trata de un estudio descriptivo, retrospectivo de todos los pacientes mayores de 65 años diagnosticados de fractura de cadera que acudieron a urgencias del Hospital Universitario Vall d’Hebron en el periodo de pandemia COVID-19 comprendido entre el 11 de marzo y el 24 de abril de 2020. Fueron seguidos durante su ingreso hospitalario y a los 30 días de la fractura. Resultados: Se incluyeron un total de 63 pacientes, 18 (28,6%) de los cuales tenían una RT-qPCR positiva para COVID-19. Cuatro no pudieron ser operados debido a la gravedad que presentaban al ingreso, falleciendo a los pocos días. Tres de estos pacientes tenían la COVID-19. El 83,3% de los pacientes con RT-qPCR positiva presentaron clínica respiratoria durante su hospitalización. La duración de la estancia hospitalaria de los pacientes con RT-qPCR positiva (18,25±8,99 días) fue mayor que los pacientes no COVID (10,9±4,52 días) (p=0,01). La mortalidad intrahospitalaria de los pacientes intervenidos fue del 20% en los pacientes con RT-qPCR positiva en comparación con el 2,3% del grupo de pacientes que testaron negativo (p=0,018). La mortalidad a los 30 días fue del 40% en el grupo con RT-qPCR positiva vs. el 6,8% de los pacientes no infectados por SARS-CoV-2 (p=0,002). Conclusión: La infección por SARS-CoV-2 en pacientes ancianos con fractura de cadera aumenta tanto el tiempo de ingreso hospitalario como la mortalidad intrahospitalaria y a los 30 días.(AU)

COVID-19 became a threat to the public health system, compromising the health of the population. Patients with hip fractures, due to their age and comorbidity, were high-risk patients in this pandemic. The purpose of this study was to observe how the pandemic affected the management of hip fractures in elderly patients. Methods: This is a descriptive, retrospective study of all patients over the age of 65 diagnosed with a hip fracture that came to the emergency room of Vall d’Hebron University Hospital in the COVID-19 pandemic period, from the 11th of March to the 24th of April 2020. They were followed up during their hospital stay and 30 days after the fracture. Results: A total of 63 patients were included, 18 (28.6%) of whom had a positive RT-qPCR for COVID-19. Four could not be operated on due to the severity of the disease they presented with upon admission, dying a few days afterwards. Three of these patients had COVID-19. The 83.3% of the patients with positive RT-qPCR presented respiratory symptoms during their hospitalization. The length of hospital stays of patients with a positive RT-qPCR (18.25±8.99 days) was longer than that of patients that were RT-qPCR negative (10.9±4.52 days) (P=.01). In-hospital mortality in operated patients was 20% in patients with a positive RT-qPCR, compared with 2.3% in the group of patients who tested negative (P=.018). Mortality at 30 days was 40% in the group with positive RT-qPCR vs 6.8% in patients not infected by SARS-CoV-2 (P=.002). Conclusion: SARS-CoV-2 infection in elderly patients with hip fractures increases both the length of hospital stay, as well as in-hospital and 30-day mortality.(AU)